« Back to blog

Share this on Facebook Tweet this

Wood Floor Sanding Tips

Restoring old wooden floors with floor sanding methods has been a popular home improvement trend lately because of its eco-friendliness and the amazing results that it produced. Why is it good for the environment? Restoring old wood floorings instead of replacing them with new ones means you are not encouraging more trees to be cut down, saving more natural resources.

Whether you are taking on the job yourself or handing it over to a team of floor sanding specialists, it is always important to know the basic dos and don'ts of floor sanding so that you understand the process yourself.

The first thing that you should take note is that you'll most likely see damages, imperfections and narrow gaps caused by long usage which must be taken care of before starting the sanding job. The entire wooden floor should be checked thoroughly and any old floorboards that are severely damaged should be replaced, while the gaps and imperfections can be filled with wood fillets. This first step is crucial because if it's not done properly, the end result will not look as good as it should be.

Floor sanding machines can be easily purchased in stores but using it correctly takes some practice. If you are not familiar with the controls, the machine might eat into the floor when you let it stay in one place for too long. So it'll be a good idea to get used to the machine first by walking around the room with it turned off and try it in the corners to feel the correct motion.

Sandpaper is another important tool in the job and you'll need to have it in different grit levels in order to achieve a smoother finish. A wood floor sanding professional will start with a coarse sandpaper then continue with finer grits and eventually finish with super fine grit.

A process called denibbing needs to be done before applying a layer of lacquer to help achieve a very smooth surface. After denibbing, it is best to apply high traffic lacquer in 3 coats.

Finally, if you'd like to change the color of your wood floor, you can apply a new layer of floor stain of your choice. The flooring will look as good as new after the whole sanding process. It's a great DIY project but if you don't want to risk damaging the floor, you might want to hire a professional floor sanding company to handle it.

« More articles

Share this on Facebook Tweet this